MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. A001ITR

      Disconnect the connector.

    2. A001L4RC02
      B003WAF Bolt
      B003U82 Screw

      Remove the 2 bolts and 2 screws.

    3. Disengage the 2 guides and remove the millimeter wave radar sensor assembly.

      Note

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.