SHIFT PADDLE SWITCH REMOVAL

CAUTION / NOTICE / HINT

Note


  • Do not replace the spiral cable with the battery connected and the engine switch on.

  • Do not rotate the spiral cable without the steering wheel assembly with the battery connected and the engine switch on (IG).

  • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

  • Do not remove the steering sensor from the spiral cable.

PROCEDURE


  1. REMOVE STEERING WHEEL ASSEMBLY


  2. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Lane Departure Alert System)

    w/ Cruise Control System:

    Click here

  3. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Lane Departure Alert System)


  4. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/o Lane Departure Alert System)


    1. A001JI7

      Disengage the No. 1 switch wire connector clamp from the steering wheel assembly.

    2. A001J7A

      Disconnect the No. 1 switch wire connector.

    3. A001J03

      Remove the 4 screws, and disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.

    4. A001J5X

      Disengage the 5 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.

    5. A001L15

      Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.

  5. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Lane Departure Alert System)


    1. A001KBQ

      Disengage the guide to disconnect the No. 1 switch wire from the steering wheel assembly.

    2. Disconnect the No. 1 switch wire connector.

    3. A001I1D

      Remove the 4 screws, and disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.

    4. A001KMA

      Disengage the 6 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.

    5. A001IBF

      Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.