VALVE BODY ASSEMBLY(for 2GR) INSPECTION

PROCEDURE

1. INSPECT SHIFT SOLENOID VALVE SL1

   

   *a	Component without harness connected (Shift Solenoid Valve SL1)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 5.0 to 5.6 Ω

   2. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the shift solenoid valve SL1 connector, then check the movement of the valve.

      OK
      The solenoid makes an operating sound.

      If the result is not as specified, replace the shift solenoid valve SL1.

2. INSPECT SHIFT SOLENOID VALVE SL2

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

3. INSPECT SHIFT SOLENOID VALVE SL3

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

4. INSPECT SHIFT SOLENOID VALVE SL4

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

5. INSPECT SHIFT SOLENOID VALVE SL5

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

6. INSPECT SHIFT SOLENOID VALVE SLU

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

7. INSPECT SHIFT SOLENOID VALVE SLT

   Tech Tips

   Refer to the procedures for the shift solenoid valve SL1.

8. INSPECT SHIFT SOLENOID VALVE SL

   
   
   1. 

      *a	Component without harness connected (Shift Solenoid Valve SL)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition Shift solenoid valve SL connector terminal - Shift solenoid valve SL body 20°C (68°F) 11 to 15 Ω

   2. Connect the positive (+) lead to the terminal of the shift solenoid valve SL connector, and the negative (-) lead to the shift solenoid valve SL body.

      OK
      The solenoid makes an operating sound

      If the result is not as specified, replace the shift solenoid valve SL.

9. INSPECT SHIFT SOLENOID VALVE SR

   
   
   1. 

      *a	Component without harness connected (Shift Solenoid Valve SR)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition Shift solenoid valve SR connector terminal - Shift solenoid valve SR body 20°C (68°F) 11 to 15 Ω

   2. Connect the positive (+) lead to the terminal of the shift solenoid valve SR connector, and the negative (-) lead to the shift solenoid valve SR body.

      OK
      The solenoid makes an operating sound

      If the result is not as specified, replace the shift solenoid valve SR.