SPEED SENSOR(for 2GR) INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR SP2

   
   

   1. Install the transmission revolution sensor SP2 to the automatic transmission case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the connector to the transmission revolution sensor SP2.

2. INSTALL TRANSMISSION REVOLUTION SENSOR NT

   
   

   1. Coat a new O-ring with ATF.

   2. Install the O-ring to the transmission revolution sensor NT.

   3. Using ''TORX'' socket wrench T30, install the transmission revolution sensor NT with the bolt.

      Torque:

      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

   4. Connect the connector to the transmission revolution sensor NT.

3. INSTALL TRANSMISSION REVOLUTION SENSOR NC3

   
   

   1. Install the transmission revolution sensor NC3 to the automatic transmission case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the connector to the transmission revolution sensor NC3.

4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here