TRANSMISSION WIRE(for 8AR-FTS) INSPECTION

PROCEDURE


  1. INSPECT TRANSMISSION WIRE

    A01MVPTC05
    *a

    Component without harness connected

    (Transmission Wire (ATF Temperature Sensor))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection ATF Temperature Specified Condition
      1 (OIL) - Body ground Always 10 kΩ or higher
      2 (E2) - Body ground Always 10 kΩ or higher

      Tech Tips

      If the result is not as specified at any of the ATF temperatures shown in the following table, the driveability of the vehicle may decrease.

      Standard Resistance
      Tester Connection ATF Temperature Specified Condition
      1 (OIL) - 2 (E2) 10°C (50°F) 5 to 8 kΩ
      1 (OIL) - 2 (E2) 25°C (77°F) 2.5 to 4.5 kΩ
      1 (OIL) - 2 (E2) 110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the transmission wire (ATF temperature sensor).