TRANSMISSION WIRE(for 8AR-FTS) REMOVAL

PROCEDURE


  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION WIRE


    1. A01MXU9C01
      *a Transmission Revolution Sensor (NC3) Connector
      *b Transmission Revolution Sensor (NT) Connector
      *c Transmission Revolution Sensor (SP2) Connector

      Disconnect the transmission revolution sensor (NC3) connector.

    2. Disconnect the transmission revolution sensor (NT) connector.

    3. Disconnect the transmission revolution sensor (SP2) connector.

    4. A01MWWW

      Disconnect the transmission wire connector.

      Tech Tips

      Disengage the claw, pull down the lever, and then disconnect the transmission wire connector.

    5. A001L53

      Remove the bolt and transmission wire.