OIL PUMP COMPONENTS
ILLUSTRATION
| *1 | ENGINE ROOM ECU COVER | *2 | ENGINE WIRE |
| *3 | NO. 1 TURBO WATER PIPE | *4 | NO. 3 VENTILATION HOSE |
| *5 | NO. 4 VENTILATION HOSE | *6 | OIL LEVEL DIPSTICK GUIDE |
| *7 | OIL LEVEL DIPSTICK SUB-ASSEMBLY | *8 | SUCTION HOSE |
| *9 | VENTILATION HOSE | *10 | NO. 1 TURBO WATER BY-PASS HOSE |
| *11 | NO. 2 TURBO WATER BY-PASS HOSE | *12 | NO. 3 TURBO WATER BY-PASS HOSE |
| *13 | NO. 4 TURBO WATER BY-PASS HOSE | *14 | SUCTION PIPE SUB-ASSEMBLY |
| *15 | O-RING | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
for HFC-134a(R134a): Compressor oil ND-OIL 8 or equivalent for HFO-1234yf(R1234yf): Compressor oil ND-OIL 12 or equivalent |
- | - |
ILLUSTRATION
| *1 | CAMSHAFT BEARING CAP OIL HOLE GASKET | *2 | CAMSHAFT POSITION SENSOR (for Exhaust Side) |
| *3 | CAMSHAFT POSITION SENSOR (for Intake Side) | *4 | CAM TIMING OIL CONTROL SOLENOID ASSEMBLY |
| *5 | CYLINDER HEAD COVER GASKET | *6 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *7 | IGNITION COIL ASSEMBLY | *8 | NO. 2 CYLINDER HEAD COVER GASKET |
| *9 | GASKET | *10 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
TOYOTA Genuine Adhesive 1324, Three Bond 1324 or equivalent. | ★ | Precoated part |
ILLUSTRATION
| *1 | AIR CLEANER BRACKET | *2 | CRANK POSITION SENSOR |
| *3 | CRANKSHAFT PULLEY ASSEMBLY | *4 | IDLER PULLEY SUB-ASSEMBLY |
| *5 | NO. 6 WATER BY-PASS HOSE | *6 | TIMING CHAIN COVER ASSEMBLY |
| *7 | TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL | *8 | V-RIBBED BELT TENSIONER ASSEMBLY |
| *9 | WATER OUTLET SUB-ASSEMBLY | *10 | GASKET |
| *11 | NO. 2 OIL STRAINER GASKET | *12 | O-RING |
| *13 | OIL PUMP GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
MP Grease |  |
TOYOTA Genuine Adhesive 1324, Three Bond 1324 or equivalent. |
| ★ | Precoated part |  |
Do not apply lubricants to the threaded parts |