THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. DISCONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY


    1. B003WW7

      Slide the clip and disconnect the No. 2 radiator hose sub-assembly from the water inlet with thermostat sub-assembly.

  4. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. B003ULMC01
      *A w/o Oil Cooler
      *B w/ Oil Cooler
      *1 No. 3 Water By-pass Hose
      *2 No. 15 Water By-pass Hose
      *3 No. 7 Water By-pass Hose

      Disconnect the water inlet with thermostat sub-assembly connector.

    2. Slide the clip and disconnect the No. 3 water by-pass hose from the water inlet with thermostat sub-assembly.

    3. w/o Oil Cooler:

      Slide the clip and disconnect the No. 15 water by-pass hose from the water inlet with thermostat sub-assembly.

    4. w/ Oil Cooler:

      Slide the clip and disconnect the No. 7 water by-pass hose from the water inlet with thermostat sub-assembly.

    5. B003U4Y

      Remove the 2 bolts, nut and water inlet with thermostat sub-assembly from the timing chain cover assembly.

    6. B003SYB

      Remove the gasket from the water inlet with thermostat sub-assembly.