COOLING FAN SYSTEM ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT COOLING FAN SYSTEM

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Engine / Active Test / Control the Electric Cooling Fan.

      
      Powertrain > Engine > Active Test

      Tester Display
      Control the Electric Cooling Fan

   5. Check the operation of the cooling fan while operating it using the GTS.

      OK
      Tester Operation Fan Operation ON Cooling fans operate OFF Cooling fans stop

      If the cooling fan motor does not operate, check the cooling fan circuit.

      Click here