COOLING FAN MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. CHECK COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. Disconnect the cooling fan motor connector.

      2. B003WG6C16
        *a

        Component without harness connected

        (Cooling Fan Motor)

        Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.

      3. Measure the current while the cooling fan motor is operating.

        Standard Current
        Condition Specified Condition
        Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A

        If the result is not as specified, replace the cooling fan motor.

      4. Connect the cooling fan motor connector.

  2. CHECK NO. 2 COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. Disconnect the No. 2 cooling fan motor connector.

      2. B003WG6C16
        *a

        Component without harness connected

        (No. 2 Cooling Fan Motor)

        Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.

      3. Measure the current while the No. 2 cooling fan motor is operating.

        Standard Current
        Condition Specified Condition
        Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A

        If the result is not as specified, replace the No. 2 cooling fan motor.

      4. Connect the No. 2 cooling fan motor connector.