COOLING FAN MOTOR REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  3. REMOVE ENGINE UNDER COVER

    Click here

  4. REMOVE ENGINE ROOM ECU OUTLET DUCT

    Click here

  5. DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

  6. DRAIN ENGINE COOLANT

    Click here

  7. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  8. REMOVE RADIATOR HOSE SUB-ASSEMBLY

    Click here

  9. DISCONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY


    1. A001K1F

      Disconnect the No. 2 radiator hose sub-assembly from the radiator hose clamp.

    2. Remove the radiator hose clamp from the fan shroud assembly.

    3. Remove the bolt to disconnect the No. 2 radiator hose sub-assembly from the fan shroud assembly.

  10. REMOVE FAN SHROUD ASSEMBLY

    Click here

  11. REMOVE COOLING FAN WIRE


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. A001J37

        Disconnect the cooling fan wire connector.

      2. Disengage the 3 clamps to remove the cooling fan wire.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. A001KFGC01
        *a Lock Lever

        Disengage the claw and raise the lock lever to disconnect the No. 2 cooling fan motor connector as shown in the illustration.

      2. Disengage the 2 clamps to remove the cooling fan wire.

  12. REMOVE FAN


    1. A001I6E

      for Cooling Fan Motor 240 W + 240 W Type:


      1. Remove the nut and fan.

    2. A001L70

      for Cooling Fan Motor 300 W + 300 W Type:


      1. Remove the 3 screws and fan.

  13. REMOVE NO. 2 FAN


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. A001JWX

        Remove the nut and No. 2 fan.

    2. A001INI

      for Cooling Fan Motor 300 W + 300 W Type:


      1. Remove the 3 screws and No. 2 fan.

  14. REMOVE COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. A001KKN

        Disconnect the cooling fan motor connector.

      2. Disengage the clamp.

      3. A001J6U

        Remove the 3 screws and cooling fan motor.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. A001IYX

        Remove the 5 screws and cooling fan motor.

  15. REMOVE NO. 2 COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. A001L76

        Disconnect the No. 2 cooling fan motor connector.

      2. Disengage the clamp.

      3. A001I7R

        Remove the 3 screws and No. 2 cooling fan motor.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. A001KEG

        Remove the 5 screws and No. 2 cooling fan motor.