EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY (for Full Cover Type)

    Click here

  2. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY (for Full Cover Type)

    Click here

  3. REMOVE FRONT CENTER FLOOR BRACE

    Click here

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. B003UIK

      Remove the 2 bolts and 2 nuts to disconnect the front exhaust pipe assembly from the exhaust manifold converter sub-assembly (TWC: Front and Rear Catalyst).

    2. B003UZQ

      Remove the 4 bolts, 4 compression springs and front exhaust pipe assembly from the tail exhaust pipe assembly and tail exhaust pipe LH.

    3. Remove the 3 exhaust pipe gaskets from the front exhaust pipe assembly and exhaust manifold converter sub-assembly (TWC: Front and Rear Catalyst).

  5. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A01MVFA

      Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe baffle sub-assembly.

  6. REMOVE TAIL EXHAUST PIPE LH


    1. A01MVTG

      Remove the tail exhaust pipe LH from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe baffle sub-assembly.

  7. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY

    Tech Tips


    • Perform this procedure only when replacement of the tail exhaust pipe baffle sub-assembly is necessary.

    • If the tail exhaust pipe baffle sub-assembly is removed, replace it with a new one.


    1. A01MWJZC01
      *a Plastic Hammer

      Using a plastic hammer, remove the 2 tail exhaust pipe baffle sub-assemblies from the tail exhaust pipe assembly and tail exhaust pipe LH.