PURGE VALVE INSTALLATION

PROCEDURE


  1. INSTALL PURGE VALVE (PURGE VSV)


    1. Install the purge valve (purge VSV) to the intake air surge tank assembly with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    2. B003TBIC01
      *a 2 to 7 mm (0.0787 to 0.276 in.)
      *b 90°
      *c Upper Side
      *d Paint Mark

      Connect the purge valve (purge VSV) connector.

    3. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.

    4. Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV).

  2. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here