CANISTER(w/o Canister Pump Module) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 FUEL SENDER GAUGE ASSEMBLY

   Click here

2. INSTALL CANISTER (FUEL TANK VENT TUBE ASSEMBLY)

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSPECT FOR FUEL LEAK

   Click here

5. INSTALL REAR FLOOR SERVICE HOLE COVER

   Click here

6. INSTALL REAR SEAT CUSHION LOCK HOOK

   Click here

7. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here