PURGE VALVE(w/o Canister Pump Module) INSTALLATION

PROCEDURE


  1. INSTALL PURGE VALVE (PURGE VSV)


    1. A01MXDBC03
      *1 No. 2 Fuel Vapor Feed Hose
      *2 Fuel Vapor Feed Hose
      *3 No. 1 Check Valve

      Install the No. 1 check valve to the bracket.

    2. Install the fuel vapor feed hose to the No. 1 check valve.

    3. Connect the No. 2 fuel vapor feed hose to the No. 1 check valve and slide the clip to secure it.

    4. A01MWMSC01
      *1 No. 1 Fuel Vapor Feed Hose
      *2 Fuel Vapor Feed Hose
      *a View A
      *b 1 to 6 mm (0.0394 to 0.236 in.)
      *c 120°
      *d Paint mark
      *e Front
      *f RH

      Install the purge valve (purge VSV) to the intake manifold with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    5. Engage the clamp to the purge valve (purge VSV).

    6. Connect the fuel vapor feed hose to the purge valve (purge VSV).

    7. Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.

    8. Connect the purge valve (purge VSV) connector.

    9. Engage the No. 2 vacuum transmitting hose assembly to the purge valve (purge VSV).