FUEL RELIEF VALVE INSTALLATION

PROCEDURE


  1. INSTALL FUEL RELIEF VALVE ASSEMBLY


    1. Install a new gasket to the fuel relief valve assembly.

    2. B003U2PC01
      *a 17 mm Union Nut Wrench

      Using a 17 mm union nut wrench, install the fuel relief valve assembly to the No. 2 fuel delivery pipe sub-assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • Do not apply oil to the threads of the fuel relief valve assembly and No. 2 fuel delivery pipe sub-assembly.

      • Do not allow foreign matter to enter the No. 2 fuel delivery pipe sub-assembly during installation.

      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench.

        Click here

  2. INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY

    Click here

  3. INSTALL INTAKE MANIFOLD

    Click here