FUEL PUMP ECU INSTALLATION

PROCEDURE


  1. INSTALL FUEL PUMP CONTROL ECU BRACKET


    1. Install the fuel pump control ECU bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL FUEL PUMP CONTROL ECU


    1. Install the fuel pump control ECU to the vehicle body with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

    2. Connect the 2 fuel pump control ECU connectors.

    3. B003VRUN01

      Install the 4 clips (A).

    4. Install a new clip (B).

    5. Install the rope hook assembly with the bolt.

    6. Engage the 2 claws to close the cover.

  3. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

  6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  7. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  8. INSTALL DECK SIDE TRIM BOX RH

    Click here

  9. INSTALL DECK SIDE TRIM BOX LH

    Click here

  10. INSTALL SPARE WHEEL COVER TRAY RH (w/ Spare Tire)

    Click here

  11. INSTALL SPARE WHEEL COVER TRAY LH (w/ Spare Tire)

    Click here

  12. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

  13. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here