FUEL PRESSURE SENSOR(for High Pressure) REMOVAL

PROCEDURE


  1. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR)

    Click here

    Note


    • Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.

    • If the fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.

  2. REMOVE FUEL PIPE SUPPORT SUB-ASSEMBLY


    1. A01MWPN

      Secure the fuel delivery pipe sub-assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using a 5 mm socket hexagon wrench, remove the 2 bolts, gasket and fuel pipe support sub-assembly from the fuel delivery pipe sub-assembly.

    3. Remove the dust cap sub-assembly from the fuel pipe support sub-assembly.

    4. Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe support sub-assembly.

    5. Remove the fuel delivery pipe sub-assembly from the vise.