DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  4. REMOVE V-RIBBED BELT


    1. B003UQ6C02
      *a 5 mm Hexagon Wrench

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.

    2. Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.

    3. Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.