DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  4. REMOVE V-RIBBED BELT


    1. B003VN1

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, remove the V-ribbed belt from the V-ribbed belt tensioner assembly.

    2. B003V1VC05
      *a 5 mm Bi-hexagon Wrench

      While turning the V-ribbed belt tensioner assembly counterclockwise, align its holes, and then insert a 5 mm bi-hexagon wrench into the holes to secure the V-ribbed belt tensioner assembly.