OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  3. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  4. REMOVE ENGINE OIL LEVEL SENSOR


    1. B003X1O

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts and engine oil level sensor.

    3. B003TINC05
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    4. Remove the gasket from the engine oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.