RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT EFI INJECTION RELAY (INJ)


    1. B003VGIN05

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI injection relay (INJ).

  2. INSPECT EFI 2 RELAY (EFI MAIN NO. 2)


    1. B003VGIN05

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI 2 relay (EFI MAIN NO. 2).