CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. B003WSI

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. B003TWC

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. B003VY1

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. B003UW3

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.