ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FUEL PRESSURE SENSOR

    Click here

  2. DISCONNECT WATER BY-PASS HOSE


    1. B003U7M

      Slide the clip and disconnect the water by-pass hose from the rear water by-pass joint.

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. B003V56

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor from the rear water by-pass joint.

    3. Remove the gasket from the engine coolant temperature sensor.