IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE


  1. INSTALL SPARK PLUG


    1. Install the 6 spark plugs to the cylinder head sub-assembly.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

  2. INSTALL IGNITION COIL ASSEMBLY


    1. Install the 6 ignition coil assemblies to the cylinder head cover sub-assembly with the 6 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

    2. Connect the 6 ignition coil assembly connectors.

    3. B003U47N01

      Connect the 2 brackets to the cylinder head cover sub-assembly LH with the 2 bolts.

      Torque:
      Bolt A
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }
      Bolt B
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Connect the wire harness clamp to the intake air surge tank assembly.

    5. Connect the wire harness to the cylinder head cover sub-assembly with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  4. CONNECT NO. 2 VENTILATION HOSE

    Click here

  5. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here