IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. DISCONNECT NO. 2 VENTILATION HOSE

    Click here

  3. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  4. REMOVE IGNITION COIL ASSEMBLY


    1. B003VI4

      Remove the 2 nuts and disconnect the wire harness from the cylinder head cover sub-assembly.

    2. B003UZI

      Disconnect the wire harness clamp from the intake air surge tank assembly.

    3. Remove the 2 bolts and disconnect the 2 brackets from the cylinder head cover sub-assembly LH.

    4. Disconnect the 6 ignition coil assembly connectors.

    5. B003UI7

      Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.

  5. REMOVE SPARK PLUG


    1. Remove the 6 spark plugs from the cylinder head assembly.

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.