ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. B003U7JC01
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.

  2. REMOVE ACCELERATOR PEDAL PAD


    1. B003TPG

      Disengage the 2 claws and remove the accelerator pedal pad.

  3. REMOVE ACCELERATOR PEDAL ASSEMBLY


    1. B003TRG

      Remove the 2 bolts and accelerator pedal assembly.