SFI SYSTEM PRECAUTION


  1. INITIALIZATION

    Note


    • Make sure to perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.

      Click here

    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name See Procedure
      Lane Departure Alert System (w/ Steering Control)

      Click here

      Stop and Start System
      Variable Gear Ratio Steering System
      Parking Assist Monitor System (w/ Parallel Parking Assist Function)
      Parking Assist Monitor System (w/o Parallel Parking Assist Function)
      Pre-collision System
      Air Conditioning System

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:


    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.