RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT EFI 2 RELAY (EFI MAIN NO. 2)

    A01MY4AE01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI main No. 2 relay (EFI MAIN NO. 2).

  2. INSPECT EFI INJECTION RELAY (INJ)

    A01MY4AE01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI injection relay (INJ).