FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE RADIATOR ASSEMBLY

    Click here

  3. REMOVE CRANKSHAFT PULLEY ASSEMBLY

    Click here

  4. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL


    1. A01MXOSC01
      *a Protective Tape

      Using a screwdriver, pry out the timing gear case or timing chain case oil seal.

      Note


      • Do not damage the surface of the press fit hole or crankshaft.

      • After removing the timing gear case or timing chain case oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.