HEATED OXYGEN SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

The engine assembly with transmission is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop.

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY WITH TRANSMISSION

    Click here

  2. REMOVE HEATED OXYGEN SENSOR


    1. A01MWR9

      Disconnect the heated oxygen sensor connector.

    2. Disengage the 2 wire harness clamps.

    3. A01MVN8N01

      Using SST, remove the heated oxygen sensor from the exhaust manifold converter sub-assembly (TWC: Front and Rear Catalyst).

      SST
      09224-00011