ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01MW9H

      Disconnect the engine coolant temperature sensor connector.

    2. A01MUC5C01
      *1 Gasket

      Using SST, remove the engine coolant temperature sensor from water outlet sub-assembly.

      SST
      09817-33191

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.