CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A01MUPK

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If a camshaft position sensor has been struck or dropped, replace it.

  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A01MUT8

      Disconnect the fuel pump assembly connector.

    2. A01MXEX

      Disconnect the camshaft position sensor connector.

    3. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If a camshaft position sensor has been struck or dropped, replace it.