THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. A01MWL6C01
      *a Injector Connector (for Direct Injection)
      *b Engine Wire Connector

      Disconnect the injector connector (for Direct Injection).

    2. Disconnect the engine wire connector.

    3. A01MVQ0

      Disengage the 2 engine wire clamps.

    4. Remove the 2 bolts and disconnect the No. 6 water by-pass pipe.

    5. Disconnect the throttle body with motor assembly connector.

    6. A01MWJUC01
      *1 No. 1 Water By-pass Hose
      *2 No. 2 Water By-pass Hose

      Slide the 2 hose clamps and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the throttle body with motor assembly.

    7. A01MUA3

      Remove the 8 bolts, No. 2 air tube and throttle body with motor assembly from the intercooler assembly and intake manifold assembly.

  4. REMOVE THROTTLE BODY GASKET


    1. A01MXD4

      Remove the throttle body gasket from the intake manifold.

    2. A01MX0F

      Remove the throttle body gasket from the No. 2 air tube.

  5. REMOVE NO. 2 AIR TUBE GASKET


    1. A01MZ4P

      Remove the No. 2 air tube gasket from the intercooler assembly.