DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA

Rear Drive Shaft Assembly
Standard drive shaft length for 2GR-FSE LH Side 682.9 mm (2.24ft.)
RH Side 728.9 mm (2.39ft.)
for 4GR-FSE LH Side 685.35 mm (2.25ft.)
RH Side 731.35 mm (2.40ft.)
Propeller Shaft Assembly
Propeller intermediate shaft assembly runout Maximum runout: 0.8 mm (0.0315 in.)
Propeller shaft assembly runout Maximum runout: 0.8 mm (0.0315 in.)
Propeller with center bearing shaft assembly dimensions (between the edge surface of the center support bearing and the edge surface of the cushion respectively) 11.5 to 13.5 mm (0.453 to 0.531 in.)
for 2GR-FSE No. 2 Joint Angle -0°34' +/- 30'
No. 3 Joint Angle 1°46' +/- 32'
for 4GR-FSE No. 2 Joint Angle -0°54' +/- 30'
No. 3 Joint Angle 2°02' +/- 32'
Adjusting Washer Thickness 2.0 mm (0.0787 in.)
4.5 mm (0.177 in.)
6.5 mm (0.256 in.)
9.0 mm (0.354 in.)
11.0 mm (0.433 in.)