ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ ПРОВЕРКА

PROCEDURE


  1. CHECK BATTERY CURRENT SENSOR ASSEMBLY


    1. Check the battery current sensor assembly.


      1. A00YSHEC01
        *a

        Component without harness connected

        (Battery Current Sensor)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (VC5) - 4 (E2) Always 0.1 to 10 kΩ
        2 (VC5) - 3 (IB) Always Below 0.5 kΩ
        3 (IB) - 4 (E2) Always 0.05 to 10 kΩ

        If the result is not as specified, replace the battery current sensor assembly.

    2. Check the battery temperature sensor.


      1. A00YV0KC02
        *a

        Component without harness connected

        (Battery Current Sensor)
        *b Resistance
        *c Temperature

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (THB) - 4 (E2) 20 to 30°C (68 to 86°F) 1.5 to 2.5 kΩ

        Tech Tips


        • As the temperature increases, the resistance decreases (refer to the graph).

        • The battery temperature sensor is part of the battery current sensor assembly.

        If the result is not as specified, replace the battery current sensor assembly.