КОРПУС ДИФФЕРЕНЦИАЛА РАЗБОРКА

PROCEDURE


  1. REMOVE FRONT DIFFERENTIAL RING GEAR


    1. A01GCTFC01
      *a Matchmark

      Place matchmarks on the front differential ring gear and front differential case.

    2. A01GBDP

      Remove the 12 bolts.

    3. Using a plastic-faced hammer, remove the front differential ring gear from the front differential case.

  2. INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH

    Click here

  3. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    1. A01GC9SE01

      Using SST and a hammer, loosen the staked part of the front differential case.

      SST
      09930-00010

      Note

      Do not grind the tip of SST with a grinder other device.

    2. A01GD2X

      Using a 5 mm pin punch and hammer, tap out the front differential pinion shaft straight pin from the front differential case.

  4. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


    1. A01GAF8

      Remove the front No. 1 differential pinion shaft from the front differential case.

  5. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    1. A01GAH6

      Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front No. 1 differential side gear thrust washers and 2 front differential side gears from the front differential case.

      Tech Tips

      While rotating the 2 front differential side gears, remove the 2 front differential pinions and 2 front differential pinion thrust washers.