РАБОЧИЙ ЦИЛИНДР СЦЕПЛЕНИЯ (для моделей с 2WW) РАЗБОРКА

PROCEDURE


  1. REMOVE CLUTCH RELEASE CYLINDER KIT


    1. Remove the boot from the release cylinder body.

    2. Remove the push rod from the release cylinder body.

    3. A01QRDJ

      Using compressed air, remove the piston and spring from the release cylinder body.

      Note

      Do not damage the inside of the release cylinder body.

  2. REMOVE RELEASE CYLINDER BLEEDER PLUG


    1. Remove the breeder plug cap from the release cylinder bleeder plug.

    2. A01QOH6

      Remove the release cylinder bleeder plug from the release cylinder body.