РАБОЧИЙ ЦИЛИНДР СЦЕПЛЕНИЯ (для моделей с 2WW) УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *1 | AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY | *2 | AIR CLEANER CASE SUB-ASSEMBLY |
| *3 | BATTERY | *4 | BATTERY BRACKET REINFORCEMENT |
| *5 | BATTERY CARRIER ASSEMBLY | *6 | BATTERY CLAMP SUB-ASSEMBLY |
| *7 | BATTERY INSULATOR | *8 | BATTERY TRAY |
| *9 | NO. 1 ENGINE UNDER COVER | *10 | VACUUM HOSE |
| *11 | VENTILATION HOSE | *12 | NO. 1 FUEL HOSE |
| *13 | NO. 2 FUEL HOSE | *14 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | COMPRESSOR OUTLET ELBOW | *2 | ENGINE WIRE |
| *3 | NO. 1 AIR TUBE ASSEMBLY | *4 | NO. 2 AIR HOSE |
| *5 | NO. 4 WATER BY-PASS HOSE | *6 | NO. 1 RADIATOR PIPE |
| *7 | NO. 2 RADIATOR PIPE | *8 | WATER HOSE SUB-ASSEMBLY |
| *9 | WATER BY-PASS HOSE ASSEMBLY | *10 | RADIATOR HOSE SUB-ASSEMBLY |
| *11 | OUTLET HEATER WATER HOSE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | BLEEDER PLUG CAP | *2 | RELEASE CYLINDER BLEEDER PLUG |
| *3 | RELEASE CYLINDER BODY | *4 | SPRING |
| *5 | PISTON | *6 | PUSH ROD |
| *7 | BOOT | *8 | CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Lithium soap base glycol grease | * | For use with union nut wrench |