КОНТРОЛЛЕР СВЕЧЕЙ НАКАЛИВАНИЯ СНЯТИЕ

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE GLOW PLUG CONTROLLER ASSEMBLY


    1. A01VAZC

      Disconnect the 2 glow plug controller assembly connectors.

    2. Using a T25 "TORX" socket wrench, remove the bolt and glow plug controller assembly.