ПЕРЕКЛЮЧАТЕЛЬ РЕЖИМА ПРОВЕРКА

PROCEDURE

1. Click here

   INSPECT COMBINATION SWITCH ASSEMBLY

   
   
   1. 

      *a	Component without harness connected (Combination Switch Assembly)

      w/o Stop and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition 2 (MSW1) - 4 (MSW2) Combination switch (SPORT) on Below 1 Ω 2 (MSW1) - 4 (MSW2) Combination switch (SPORT) off 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly.

   2. 

      *a	Component without harness connected (Combination Switch Assembly)

      w/ Stop and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition 2 (MSW1) - 5 (MSW2) Combination switch (POWER MODE) on Below 1 Ω 2 (MSW1) - 5 (MSW2) Combination switch (POWER MODE) off 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly.