МАСЛЯНЫЙ ПОДДОН УСТАНОВКА

PROCEDURE


  1. INSTALL OIL CLEANER (CVT) MAGNET


    1. A01V6YGC02
      *1 Oil Cleaner (CVT) Magnet

      Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly.

  2. INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY


    1. Clean the transaxle oil (CVT) pan sub-assembly installation surface of the continuously variable transaxle assembly.

    2. Install a new transaxle oil pan (CVT) gasket to the transaxle oil (CVT) pan sub-assembly.

    3. Install the transaxle oil (CVT) pan sub-assembly to the continuously variable transaxle assembly with the 19 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    5. Using a 6 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

    6. Using a 10 mm hexagon socket wrench, install a new gasket and drain plug to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  4. INSPECT FOR FLUID LEAK

  5. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here