ДАТЧИК ДАВЛЕНИЯ В ВЫПУСКНОМ КОЛЛЕКТОРЕ УСТАНОВКА

PROCEDURE

1. INSTALL EXHAUST MANIFOLD PRESSURE SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the exhaust manifold pressure sensor.

   2. Using a 27 mm deep socket wrench, install the exhaust manifold pressure sensor.

      Note

      
      

      • Do not allow foreign matter to contact the oil seal face of the exhaust manifold pressure sensor.

      • Be careful not to damage the O-ring when installing the exhaust manifold pressure sensor.

   3. Connect the exhaust manifold pressure sensor connector.

2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

   Click here

3. INSTALL NO. 1 ENGINE COVER

   Click here