ПЕРЕПУСКНОЙ РАСПРЕДЕЛИТЕЛЬНЫЙ КЛАПАН РОГ СНЯТИЕ

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE EGR BYPASS VALVE SWITCHING VALVE


    1. Disconnect the EGR bypass valve switching valve assembly connector.


      1. A01T9NEC01
        *a Spring Lock

        Pull the EGR bypass valve switching valve assembly connector off of the EGR bypass valve switching valve assembly while pushing down the spring lock of the EGR bypass valve switching valve assembly connector.

        Note

        If the EGR bypass valve switching valve assembly connector is disconnected without the spring lock being pushed down, the EGR bypass valve switching valve assembly connector may be damaged.

      2. Disconnect the 2 vacuum hoses.

      3. Detach the claw and remove the EGR bypass valve switching valve assembly.