ОХЛАДИТЕЛЬ РОГ УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *1 | AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY | *2 | AIR CLEANER CASE SUB-ASSEMBLY |
| *3 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY | *4 | BATTERY |
| *5 | BATTERY BRACKET REINFORCEMENT | *6 | BATTERY CARRIER ASSEMBLY |
| *7 | BATTERY CLAMP SUB-ASSEMBLY | *8 | BATTERY INSULATOR |
| *9 | BATTERY TRAY | *10 | NO. 1 ENGINE COVER |
| *11 | NO. 1 ENGINE UNDER COVER | *12 | VACUUM HOSE |
| *13 | NO. 1 FUEL HOSE | *14 | NO. 2 FUEL HOSE |
| *15 | VENTILATION HOSE | *16 | GROUND WIRE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | COMPRESSOR OUTLET ELBOW | *2 | ENGINE WIRE |
| *3 | NO. 1 AIR TUBE ASSEMBLY | *4 | NO. 4 WATER BY-PASS HOSE |
| *5 | NO. 1 RADIATOR PIPE | *6 | NO. 2 RADIATOR PIPE |
| *7 | OUTLET HEATER WATER HOSE | *8 | WATER HOSE SUB-ASSEMBLY |
| *9 | WATER BY-PASS HOSE ASSEMBLY | *10 | RADIATOR HOSE SUB-ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | EGR COOLER ASSEMBLY WITH EGR VALVE ASSEMBLY | *2 | FUEL FEED PIPE SUB-ASSEMBLY |
| *3 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR | *4 | NO. 1 TURBO INSULATOR |
| *5 | WIRE HARNESS | *6 | GASKET |
| *7 | WATER PIPE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | 1st: 5.0 (51, 44 in.*lbf) 2nd: Loosen 90° 2nd: 13 (133, 10) |
*T2 | 8.0 (82, 71 in.*lbf) Bolt cannot be removed from the intake manifold |
ILLUSTRATION
| *1 | EGR VALVE ASSEMBLY | *2 | EGR COOLER HOSE |
| *3 | EGR COOLER ASSEMBLY | *4 | GROMMET |
| *5 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |