ДИФФЕРЕНЦИАЛЬНЫЙ ДАТЧИК ДАВЛЕНИЯ УСТАНОВКА

Click here Click here

PROCEDURE

1. Click here

   INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

   
   
   1. 

      *1	Paint Mark (Yellow)
      *2	Paint Mark (Red)
      *a	Front Side of Vehicle
      *b	LH Side

      Connect the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose assembly to the differential pressure sensor assembly, and slide the 2 clamps to secure the hoses.

      Note:

      Connect the vacuum transmitting hoses so that the painted marks of the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose assembly are as shown in the illustration.

   2. Install the differential pressure sensor assembly with the nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   3. Connect the differential pressure sensor connector.