ДАТЧИК ТЕМПЕРАТУРЫ ОТРАБОТАВШИХ ГАЗОВ СНЯТИЕ

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER

   Click here

2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

   Note

   If the exhaust gas temperature sensor is dropped, replace it with a new one.

   
   

   1. 

      Disconnect the exhaust gas temperature sensor connector and detach the exhaust gas temperature sensor connector clamp.

   2. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.

3. REMOVE ENGINE ASSEMBLY

   Click here

4. REMOVE NO. 4 MANIFOLD CONVERTER INSULATOR

   Click here

5. REMOVE MANIFOLD STAY

   Click here

6. REMOVE NO. 2 MANIFOLD STAY

   Click here

7. REMOVE NO. 2 EXHAUST MANIFOLD STAY

   Click here

8. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

   Click here

9. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

   Note

   If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.

   
   

   1. 

      Detach the No. 2 exhaust gas temperature sensor connector clamp.

   2. Using a 14 mm union nut wrench, loosen the union nut.

   3. Remove the nut, clamp and No. 2 exhaust gas temperature sensor.

10. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the No. 3 exhaust gas temperature sensor is dropped, replace it with a new one.

    
    

    1. 

       Detach the No. 3 exhaust gas temperature sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.