ТОПЛИВНЫЙ БАК СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT FLOOR COVER


    1. A01QPRP

      Remove the bolt and nut.

    2. Detach the 5 clips and remove the front floor cover.

  2. REMOVE NO. 1 FUEL TANK PROTECTOR


    1. A01QSUU

      Detach the 3 clips and remove the nut and No. 1 fuel tank protector.

  3. REMOVE NO. 1 FLOOR UNDER COVER


    1. A01QSG4

      Detach the clip and remove the 2 nuts and No. 1 floor under cover.

  4. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A01QSQC

      Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly.

  5. DISCONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (w/ Combustion Type Power Heater)


    1. A01QSF1

      Slide the clamp and disconnect the No. 2 fuel main tube sub-assembly from the fuel pipe.

  6. DISCONNECT FUEL TANK RETURN TUBE


    1. A01QRS6

      Slide the clamp and disconnect the fuel tank return tube from the fuel pipe.

  7. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY


    1. A01QQYN

      Disconnect the fuel tank main tube sub-assembly from the fuel pipe.

      Click here

  8. DISCONNECT FUEL TANK TO FILLER PIPE HOSE


    1. A01QP5J

      Disconnect the fuel tank to filler pipe hose from the fuel tank assembly.

  9. DISCONNECT FUEL TANK BREATHER HOSE


    1. A01QQ2L

      Disconnect the fuel tank breather hose from the fuel tank assembly.

      Click here

      Note

      Do not use any tools in this procedure.

  10. REMOVE FUEL TANK ASSEMBLY


    1. Set an engine lifter underneath the fuel tank assembly.

    2. Disconnect the wire harness from the 2 fuel tube grommets.

    3. A01QQ0V

      Remove the 2 bolts and No. 1 fuel tank band sub-assembly.

    4. Remove the 2 bolts and No. 1 fuel tank band sub-assembly LH.

    5. Remove the 2 bolts and No. 2 fuel tank band sub-assembly.

    6. Slightly lower the engine lifter.

      Note

      Be careful not to cut the wire harness.

    7. Disconnect the fuel sender gauge connector and remove the fuel tank assembly.

      Note

      Before this procedure, check the connector for dirt, mud or other contamination.

  11. REMOVE FUEL EMISSION HOSE


    1. A01QTXE

      Detach the clamp and remove the fuel emission hose.

      Click here

  12. DISCONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (w/ Combustion Type Power Heater)


    1. A01QT7V

      Remove the tube joint clip and pull out the No. 2 fuel main tube sub-assembly.

      Note


      • Before removing a tube joint clip, check for foreign matter around the tube joint clip. Clean if necessary.

      • Do not use any tools in this procedure.

      • Do not forcefully bend or twist the fuel tank return tube.

      • Put the fuel tank return tube in a plastic bag to prevent damage and contamination.

      • If the fuel suction with pump and gauge tube assembly and fuel tank return tube are stuck together, pinch the fuel tank return tube and turn it carefully to disconnect it.

      • Be careful not the damage any tube joint clip. If a tube joint clip is damaged, replace it.

  13. DISCONNECT FUEL TANK RETURN TUBE


    1. A01QSTO

      Remove the tube joint clip and pull out the fuel tank return tube.

      Note


      • Before removing a tube joint clip, check for foreign matter around the tube joint clip. Clean if necessary.

      • Do not use any tools in this procedure.

      • Do not forcefully bend or twist the fuel tank return tube.

      • Put the fuel tank return tube in a plastic bag to prevent damage and contamination.

      • If the fuel suction with pump and gauge tube assembly and fuel tank return tube are stuck together, pinch the fuel tank return tube and turn it carefully to disconnect it.

      • Be careful not the damage any tube joint clip. If a tube joint clip is damaged, replace it.

  14. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY


    1. A01QRGW

      Remove the tube joint clip and pull out the fuel tank main tube sub-assembly.

      Note


      • Before removing a tube joint clip, check for foreign matter around the tube joint clip. Clean if necessary.

      • Do not use any tools in this procedure.

      • Do not forcefully bend or twist the fuel tank main tube sub-assembly.

      • Put the fuel tank main tube sub-assembly in a plastic bag to prevent damage and contamination.

      • If the fuel suction with pump and gauge tube assembly and fuel tank main tube sub-assembly are stuck together, pinch the fuel tank main tube sub-assembly and turn it carefully to disconnect it.

      • Be careful not the damage any tube joint clip. If a tube joint clip is damaged, replace it.

  15. REMOVE FUEL TANK VENT TUBE SET PLATE


    1. A01QQ77

      Remove the 8 bolts and fuel tank vent tube set plate.

  16. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

    Click here

  17. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY


    1. A01QO84

      Remove the fuel tank main tube sub-assembly from the No. 3 fuel tube clamp, No. 5 fuel tube clamp and 3 fuel tube grommets.

  18. REMOVE FUEL TANK RETURN TUBE


    1. Remove the fuel return tube from the No. 3 fuel tube clamp, No. 5 fuel tube clamp and 3 fuel tube grommets.

  19. REMOVE NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (w/ Combustion Type Power Heater)


    1. Remove the No. 2 fuel tank main tube sub-assembly from the No. 3 fuel tube clamp, No. 5 fuel tube clamp and 3 fuel tube grommets.

  20. REMOVE NO. 5 FUEL TUBE CLAMP


    1. Remove the No. 5 fuel tube clamp from the fuel tank assembly.

  21. REMOVE NO. 3 FUEL TUBE CLAMP


    1. Remove the No. 3 fuel tube clamp from the fuel tank assembly.

  22. REMOVE FUEL TUBE GROMMET


    1. Remove the 3 fuel tube grommets from the fuel tank assembly.

  23. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here