ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

Click here Click here

PROCEDURE

1. Click here

   INSTALL REAR ENGINE OIL SEAL

   
   
   1. 

      Using SST, tap in a new rear engine oil seal until its surface is flush with the rear oil seal retainer edge.

      09608-36010
      09950-70010	09951-07100

      Note:

      Do not tap in the rear engine oil seal at an angle.

2. Click here

   INSTALL FLYWHEEL WITH DAMPER ASSEMBLY

   
   

   1. Install the crankshaft position sensor plate to the crankshaft.

   2. Temporarily install the flywheel with damper assembly with 8 new bolts.

   3. 

      Using SST, secure the flywheel with damper assembly.

      SST
      PZ4TB-04939-38

   4. 

      Using SST, tighten the 8 bolts.

      SST
      PZ4TB-04910-18

      120 N*m	1224 kgf*cm	89 ft.*lbf

   5. Remove SST.

3. Click here

   INSTALL CLUTCH DISC ASSEMBLY

   Click here

4. Click here

   INSTALL CLUTCH COVER ASSEMBLY

   Click here

5. Click here

   INSPECT AND ADJUST CLUTCH COVER ASSEMBLY

   Click here

6. Click here

   INSTALL MANUAL TRANSAXLE ASSEMBLY

   Click here