СВЕЧА НАКАЛИВАНИЯ СНЯТИЕ

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

    Click here

  5. REMOVE ENGINE COVER BRACKET


    1. A01V94Y

      Remove the bolt, nut and engine cover bracket.

    2. Remove the bolt and disconnect the engine wire so that the glow plugs can be removed in a later step.

  6. REMOVE NO. 1 GLOW PLUG CONNECTOR


    1. A01VAQN

      Remove the 5 screw grommets.

    2. A01V8CJC02
      *1 Wire Harness

      Remove the nut and disconnect the wire harness.

    3. Remove the 4 nuts and No. 1 glow plug connector.

  7. REMOVE GLOW PLUG ASSEMBLY


    1. A01V9HW

      Using a 10 mm deep socket wrench, remove the 4 glow plugs.